Integrated Circuits and Devices

The OP07 has very low input offset voltage, like 75 µV and low input bias current like 4 nA and is used in instrumentation applications in the domains of Process control and Test-Measurement.' The OP07E is specified for operation over the 0°C to 70°C… more »

The LF198/LF298/LF398  are monolithic sample-and-hold circuits which utilize BI-FET technology to obtain ultra-high dc accuracy with fast acquisition of signal and low droop rate. LF398 - Monolithic Sample and Hold Circuit Operating as a unity gain… more »

These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched… more »

The JFET-input operational amplifiers in the TL07x series are designed as low-noise versions of the TL08x series amplifiers with low input bias and offset currents and fast slew rate. Quadrature Oscillator - 100 kHz - TL072-TI - TL072-TI  Opamp The… more »

CA3140 and CA3130 are originally RCA part numbers( i feel). They are amazing close to ideal opamps, the input offset has to be trimmed. I used to use it when high input impedance is required. 1.5T ohm 10pA is the specs. A Electrometer can be made with… more »