Integrated Circuits and Devices

 The CC1125 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. 

This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.

868 MHz and 915 MHz Design - TI

This is part of the CC1125 Development Kit - The kit includes the SmartRF Transceiver Evaluation board (TrxEB), which has a number of useful features for development of prototype software, as well as USB connectivity making it possible to connect the board to a PC and control the radio from SmartRF Studio.

Careful study of CMOS characteristics show that CMOS devices used in a system design can be used for linear building blocks as well as digital blocks.

Utilization of these new devices will decrease package count and reduce supply requirements. The circuit designer now can do both digital and linear designs with the same type of device.

CMOS Linear Applications AN-88

CMOS inverters can be paralleled for increased power to drive higher current loads. Loads of 5.0 mA per inverter can be expected under AC conditions.

PNP and NPN bipolar transistors have been used for many years in “complementary” type of amplifier circuits. Now, with the arrival of CMOS technology, complementary P-channel/N-channel MOS transistors are available in monolithic form.
 

Specialists in converting legacy peripherals to Universal Serial Bus (USB). We offer the easiest route to USB migration by combining USB-Serial (USB-RS232) and USB-FIFO silicon solutions with our ready-to-go royalty free USB drivers. FTDI's "total" solutions offer reduced development and debug costs and a fast time to market. - https://www.ftdichip.com/

FTDI Chip - Legacy peripherals to USB

FT9xx Development Modules - Based upon the FT32 high performance, 32 bit RISC core, the FT9xx series provides a plethora of connectivity options, making it the ideal choice for advanced technology bridging solutions. By executing instructions from shadow RAM, rather than flash memory, the FT9xx can operate at true Zero Wait States (0WS) up to 100MHz with 310 DMIPS performance.

The MM900EV development modules provide full hardware feature support for the FT90x MCU in a variety of form factors.The modules also provide a connector for accessing external plug-in hardware over an SPI interface. Targeted applications for the module include home security, HMI and automation systems,USB capability products, embedded multimedia applications and a range of other industrial control systems.

Future Technology Devices International Ltd
Unit 1, 2 Seaward Place Centurion Business Park Glasgow G41 1HH  United Kingdom

"A global leader in nanomanufacturing technology solutions with a broad portfolio of innovative equipment, service and software products for the fabrication of semiconductor chips, flat panels, solar photovoltaic cells, flexible electronics and energy efficient glass."

Applied Materials - Nanomanufacturing - https://www.appliedmaterials.com/

Applied Materials' IP portfolio includes more than 8,000 patents worldwide and technologies. "They make the machines that make the chips".

A Virtual Tour of Applied Materials’ Clean Room

” Our machines harness plasma physics, chemistry and lots of computing power in order to fabricate nanoscale structures in the trillions, exactly the same, time after time after time. Many of our systems are developed at the Maydan Technology Center, located on our campus in Sunnyvale, California...."

Applied Materials
3050, Bowers Avenue, Santa Clara, CA 95054, USA

A leading supplier of semi automatic and fully automatic inline printers, wafer bumping and wafer printing equipment. The equipment they manufacture are used in Surface Mount Technology (SMT) and Semiconductor Industries(SI).  - https://www.milarasmt.com/

Milara Inc - Solutions for Semiconductor Industries

They also provide mechanical and electrical engineering design services and Manufacturing Support.

"The MiniTouch semi-automatic stencil/screen printer offers advanced technological features and combines them with unprecedented ease of operation."

MiniTouch MT2020 Semi Automatic Stencil Printer

Features Include

• High precision/low volume prototyping 
• Vibration squeegee technology equipped 
• Dual squeegee Pressure Control option.
• Print Area 12 x 14 inches.
• Closed Loop Servo Torque Drive Systems

Milara Inc
4 Marc Road Medway, MA 02053 USA